| Part number | 242100.415 |
| INPUT DATA |
| Voltage (nominal) | 10 - 75 VDC |
| System output grounding | Supports positive, floating and negative distributions. All inputs
are referenced to shunt. |
Power Consumption, max - no relays energized
max - all relays energized | 3,1W (display sleep)
5,5W (display on) |
SYSTEM CONNECTIONS - SYSTEM
MONITORS |
| Voltage sense, system voltage support | 12 VDC, 24VDC, 48VDC & 60VDC |
| Current sense, shunt support | 0 - 20mV and 0 - 60mV |
| Battery fuse monitoring | Auxiliary switch NO/NC, Pull up/down |
| Load fuse monitoring | Auxiliary switch NO/NC, Diode Matrix Pull up/down |
| Ground fault detection | Simple bridge circuit detection [Tolerance: ±10%, alarm range: 25kΩ
– 500kΩ] |
| Fan speed monitoring | Tacho sense 0-65000 rpm [Input max. 15V] |
| SYSTEM CONNECTIONS - LVD CONTROL |
| Battery disconnect | 1 (latched or non-latched supported) |
| Load disconnect | 1 (latched or non-latched supported) |
| INPUTS AND OUTPUTS |
| Digital configurations, Inputs #1-6 | Auxiliary switch: NO/NC
Temperature (for NTC probe) |
| Analog configurations, Inputs #1-4 | Analog Voltage[±0 - 10V]
±4-20mA current measurement (through external 470kΩ resistor) |
| Analog configurations, Inputs #5-6 | Analog Voltage[0-75V]
Symmetry measurement |
Output configurations, Outputs #1-6
(alarms) | 6x Relay–Dry/Form C
Configurable Normally Open/Closed
[Max capacity 75V/2A/60W] |
| Fan Control | Analog Voltage [0 - 10V]
Output Current 0 - 20 mA
Fan Input Impedance minimum 10 kΩ |
| CAN Power Available for Eltek CAN Nodes | 500mA |
| USER INTERFACE |
| Local | 2.2” TFT 65k Colour display, QVGA resolution, 4 keys |
| Ethernet port | 10/100 BASE-T (HP Auto MDI/MDI-X)
IP protocols: HTTP / SSL, SNMP v3, MODBUS TCP and pComm UDP
(PowerSuite) |
| Serial port | RS-232 and RS-485 on RJ11 connector
Serial protocols: MODBUS RTU, Modem Call-Back/SMS reporting (PSTN
or GSM), COMLI,
CSCP and pComm (PowerSuite) |
| GENERAL SPECIFICATIONS |
| Dimensions (WxHxD*) * depth behind panel | 232.2 x 76.2 x 33.0mm (9.1 x 3 x 1.3”) |
| Temperature Range | Operating -20 to +65˚C (-40 to 149˚F) |
| DESIGN STANDARDS |
| Electrical safety | UL 60950-1-3rd edition, EN 60950-1-3rd edition |
| EMC | ETSI EN 300 386 V.1.4.1
EN 61000-6-1 / -2 / -3 / -4
FCC Part 15 Subpart 109 |
| Environment | ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3) & 2-3 (Class 3.2)
ROHS compliant |
| | |
